DynaVap VonG (i) – Titanium
The DynaVap VonG (i) – Titanium combines manual heating with a rotating airflow sleeve and a mouthpiece that connects directly to compatible water tools. Use it on its own for a compact setup, or pair it with glass when you prefer water-cooled vapour.
Its titanium construction, replaceable parts and adjustable bowl make it a versatile choice for dry herb sessions. Meanwhile, the Captive Cap provides an audible heating signal, so you can follow each cycle without a screen or electronic controls.
Key features
- Titanium tip, stem, sleeve and condenser.
- Stainless steel Captive Cap.
- Rotating sleeve for airflow control.
- Tapered mouthpiece for 10 mm and 14 mm female water tool connections.
- Adjustable bowl for standard or smaller loads.
- Manual heating with a torch or compatible induction heater.
- Removable components for cleaning and customisation.
Rotating airflow control
The VonG (i) features an interchangeable titanium sleeve that rotates smoothly around the stem. Turn it to adjust airflow and find a draw that suits your preference.
Because the sleeve forms part of a removable assembly, you can also take the stem apart for cleaning or fit a different compatible sleeve. This gives you a practical way to customise the appearance of your vaporiser.
Use it directly or with a water tool
The tapered mouthpiece fits compatible 10 mm and 14 mm female glass connections. As a result, you can switch between direct use and a matching water tool without adding a separate adaptor.
For a simple setup, draw straight from the mouthpiece. Alternatively, connect it to your glass when you want to include water cooling in your session. Check the joint size before choosing accessories.
Adjustable bowl for smaller loads
The bowl holds approximately 0.1 g of dry herb in its standard position. Alternatively, move the screen to the smaller setting for a load of around 0.05 g.
This lets you choose how much herb to prepare before heating. However, the exact amount will depend on the grind and how firmly you fill the chamber.
Titanium VonG tip
The titanium tip features a notched chamber and a five-fin profile designed to support heat exchange. Its contoured chamber also helps distribute heat during use.
The tip supports several compatible accessories, including the DynaCoil and standard DynaVap dosing capsules. These optional parts let you adapt your setup as your needs change.
Battery-free heating
The VonG (i) has no internal battery. Instead, you heat the cap with an external heat source, such as a torch lighter or compatible induction heater.
This means there is no charging cable or battery level to manage on the vaporiser itself. An induction heater may still need its own power supply or charging.
Technical specifications
| Feature | Specification |
|---|---|
| Product | DynaVap VonG (i) – Titanium |
| Intended material | Dry herb |
| Main metal components | Titanium |
| Cap material | Stainless steel |
| Dimensions | 1.4 × 1.4 × 9.1 cm |
| Weight | 19 g |
| Bowl capacity | Approximately 0.1 g or 0.05 g |
| Heating method | External torch or compatible induction heater |
| Airflow control | Rotating sleeve and air port |
| Water tool connections | 10 mm and 14 mm female joints |
| Internal battery | None |
| Country of manufacture | United States |
Dimensions, weight and bowl capacities follow the retailer’s specifications.
How to use the DynaVap VonG (i) – Titanium
- First, remove the cap from the cool tip.
- Add dry herb to the chamber, then replace the cap.
- If you use a torch, rotate the device while heating the side of the cap.
- Stop heating when the cap clicks.
- Draw through the mouthpiece or a compatible water tool.
- Wait for the cooling click before starting another heating cycle.
- Finally, allow the device to cool before removing the cap or emptying the bowl.
The click guides your heating cycle; it does not provide a precise digital temperature reading. Keep your fingers away from the hot cap and tip.
Cleaning and maintenance
Regular cleaning helps keep the airflow clear and removes residue from the vapour path.
First, let the device cool and remove the cap. Then disassemble the parts that need cleaning. Remove the O-rings before cleaning metal components with isopropyl alcohol, and rinse those components thoroughly afterwards.
Clean the cap separately with a lightly dampened cotton swab. Do not soak or submerge it in water or cleaning solution. Finally, let every part dry completely before reassembly and heating.
What is included?
The MagicVaporizers listing specifies:
- DynaVap VonG (i) – Titanium vaporiser.
Packaging and bundled accessories can vary between sellers. Therefore, check the selected package for a storage case or heating accessory before ordering.
Frequently asked questions
Does the VonG (i) need charging?
No. The vaporiser has no internal battery and uses an external heat source.
Can I use it without a water tool?
Yes. You can draw directly from the mouthpiece or connect it to compatible glass.
Can I replace the titanium sleeve?
Yes. The sleeve is interchangeable, so you can fit another compatible VonG (i) sleeve.
Can I use concentrates?
The VonG tip supports the optional DynaCoil accessory. For concentrate use, fit the appropriate accessory and follow its instructions.
Choose your VonG (i) setup
Choose the DynaVap VonG (i) – Titanium for hands-on heating, adjustable airflow and a choice of direct or water tool use. Select your preferred heating accessory and check the package contents to complete your setup.













Reviews
There are no reviews yet.