Buy Arizer Go SRT Vaporiser
The Arizer Go SRT brings Arizer’s glass-based dry herb system into a pocket-sized device. You can fill a Go Shell before leaving home and swap it into the vaporiser when you want a session. Alternatively, load the supplied glass aroma tube directly, as you would with a classic Arizer portable.
The Go SRT combines quick heating with three presets that you can edit for temperature and heat time. It also includes a 14 mm water pipe adaptor, so you have several ways to use the same device without buying an adaptor first.
Glass pieces protected by a compact body
The Go SRT measures 11 × 6 × 3 cm and weighs 237 g. Its glass piece sits inside the body rather than extending far above it. When you pack the device away, a magnetic silicone cap covers the opening and protects the glass from everyday knocks.
Its size makes it easier to carry than Arizer’s larger portables. However, the solid body and battery give it a noticeable weight in a pocket.
Two ways to load your herbs
You can choose between the Go Shell and the Go Glass Aroma Tube:
- Go Shell: Fill the small glass shell in advance, fit its screen and cap it for travel. When you are ready, place it in the vaporiser and attach the Go Mouthpiece.
- Go Glass Aroma Tube: Put ground dry herbs straight into the chamber at the end of the tube. This gives you a simple glass setup without using a separate shell.
The box contains one Go Shell. Extra shells and carry cases are optional purchases. Go Shells are made for the Go SRT and do not fit earlier Arizer models.
Fast hybrid heating
The Go SRT uses a hybrid oven that Arizer describes as 75% convection and 25% conduction. Heated air passes through the herbs, while warmth from the surrounding chamber also helps bring the load up to temperature.
The published heat-up specification is approximately 5–15 seconds. MagicVaporizers advises allowing around 20 seconds before drawing in everyday use, especially at a higher setting. The display shows the heating stage and session time, so you can follow what the device is doing.
Three presets you can make your own
Set the temperature anywhere from 50 °C to 220 °C. You can also edit three presets, saving both a temperature and a heat time for each one. That gives you a quick way to move between a short draw and a longer session without entering the settings each time.
The colour display and three buttons handle the controls. You can also adjust features such as sound, vibration, screen brightness and automatic shut-off.
Use it with a water pipe
A glass Go WPA adaptor comes in the box. Use it with a Go Shell to connect the Go SRT to a compatible 14 mm water pipe or bubbler. When you turn the device upside down for this setup, its display can rotate to remain readable.
The water pipe itself is not included. Arizer also sells a separate frosted glass aroma tube for another water pipe setup.
Battery and charging
Arizer quotes up to 60 minutes of continuous use. The Go SRT charges through USB-C Power Delivery, and you can use it while plugged in. MagicVaporizers lists a 5,000 mAh 21700 battery and estimates around ten sessions per charge; actual results depend on your settings and session length.
The battery is serviceable, but it is not designed for a quick swap during a session. Follow Arizer’s official replacement instructions or contact its support team when the battery eventually needs attention.
Arizer Go SRT specifications
| Feature | Details |
|---|---|
| Main use | Dry herbs |
| Heating | Hybrid: 75% convection, 25% conduction |
| Heat-up specification | Approximately 5–15 seconds |
| Temperature range | 50–220 °C |
| Presets | Three editable presets |
| Battery | Serviceable 5,000 mAh 21700 |
| Quoted continuous use | Up to 60 minutes |
| Charging | USB-C Power Delivery |
| Use while plugged in | Yes |
| Water pipe connection | Supplied 14 mm Go WPA |
| Size | 11 × 6 × 3 cm |
| Weight | 237 g |
| Country of manufacture | Canada |
What comes in the box?
The standard package listed by Arizer and MagicVaporizers includes:
- Arizer Go SRT vaporiser
- Magnetic On The Go Cap
- USB-C to USB-C cable
- Go Glass Aroma Tube
- Go Mouthpiece
- 14 mm Go WPA water pipe adaptor
- One Go Shell, five filter screens and a Go Shell Grip
- Two Go Stem Caps
- Stainless steel stirring tool
- Three travel tubes with caps
- Cleaning brush
- Operating instructions
Check the retailer’s current package list before ordering, particularly if an accessory bundle appears alongside the standard kit.
How to use the Arizer Go SRT
- Charge the device before its first use.
- Loosely fill a Go Shell or the glass aroma tube with ground dry herbs. Leave enough room for air to pass through.
- Place the filled glass piece in the device and fit the appropriate mouthpiece.
- Hold the Action button to switch on the Go SRT.
- Choose a preset with the Up or Down button, then press Action to start heating.
- Watch the display and wait for the ready alert before taking a steady draw.
- After the session, let the glass cool before you remove, empty or clean it.
Cleaning and care
Tap out used herbs after the glass has cooled, then use the included brush to clear loose material. Check the Go Shell screen if the draw starts to feel tight. You can remove the glass pieces and screens for a deeper clean, following Arizer’s care instructions. Let everything dry fully before the next session.
Keep the electrical body and USB-C port dry. Also take care when handling a freshly used shell: the glass can stay hot after the heater stops.
Frequently asked questions
Does the Arizer Go SRT work with concentrates?
Arizer presents the Go SRT as a dry herb and botanical heater. Its standard loading instructions and supplied Go Shell target dry material; do not assume that wax or liquids are compatible.
Can I use the Go SRT without a Go Shell?
Yes. The supplied Go Glass Aroma Tube has its own herb chamber, so you can load it directly.
Does it include a water pipe adaptor?
Yes. The box includes a glass Go WPA for a compatible 14 mm water pipe. The water pipe is a separate item.
Can I replace the battery?
The battery is serviceable, but it is not a tool-free battery swap. Use Arizer’s official guidance for replacement.
What warranty applies?
MagicVaporizers lists a two-year limited warranty on the device, a lifetime warranty on the heating element and a one-year battery warranty. Glass accessories are excluded. Check the terms supplied by your chosen seller before purchase.
Choose the setup that fits your day
Pick the glass aroma tube for a simple, direct-loading session, or prepare Go Shells when you want quicker changes away from home. The included water pipe adaptor adds an option for use at home. Check the seller’s current price, warranty and package contents before ordering the Arizer Go SRT.






















Reviews
There are no reviews yet.