Buy Angus Enhanced
The Angus Enhanced brings halogen heating and ruby-ball heat storage to a portable dry herb vaporiser. A 100 W bulb heats the ruby balls, which retain and distribute warmth through the heating system.
With adjustable airflow, five temperature presets and replaceable batteries, you can tailor both the draw and your session routine. Meanwhile, the included glass accessories give you several ways to set up the device.
Key features
- 100 W halogen heating system.
- Ruby balls for heat retention and distribution.
- Five temperature presets from 180°C to 220°C.
- Boost Mode adds 10°C during a session.
- Adjustable airflow dial.
- Two replaceable 18650 batteries.
- USB-C charging.
- Glass mouthpieces, sidecar bubbler and water pipe adaptor.
Halogen heating with ruby balls
The Angus Enhanced uses a halogen bulb as its heat source. Ruby balls surround the heating area and help preserve warmth as air passes through the system.
This arrangement combines convection and radiant heating. Allow approximately 45–60 seconds for the device to reach its selected setting, then follow the ready signal before drawing.
Five temperature settings
Choose from five standard presets:
| Setting | Temperature |
|---|---|
| Level 1 | 180°C |
| Level 2 | 190°C |
| Level 3 | 200°C |
| Level 4 | 210°C |
| Level 5 | 220°C |
Double-click the button to cycle through the settings. The LED ring identifies the selected level, so you can check your temperature without a screen.
Boost Mode
Hold the power button during a session to raise the temperature by 10°C. Release it to return to your previous setting.
Consequently, you can add a brief temperature increase without changing your chosen preset. At the highest standard setting, Boost Mode reaches 230°C.
Adjustable airflow
The airflow dial sits on the base of the Angus Enhanced. Turn it to change the resistance and find a draw that feels comfortable.
Start with a partly open position, then make small adjustments. This gives you a practical way to explore the airflow before settling on your preferred position.
Glass cooling options
The kit includes three glass stems of different lengths, a sidecar bubbler and a glass water pipe adaptor. Therefore, you can change the setup without buying the main glass accessories separately.
The stem screens also allow space for cooling balls within the glass. You can adjust their position to accommodate your preferred arrangement.
Replaceable batteries and USB-C charging
The Angus Enhanced runs on two replaceable 18650 cells. Keep a dedicated matched pair together and use batteries that meet the manufacturer’s requirements.
You can charge the cells inside the device through USB-C or use a suitable external charger. The LED ring flashes during charging and switches off when charging finishes.
For carrying spare cells, use protective battery cases. Check the wrappers regularly, and never use damaged batteries or leave charging unattended.
Technical specifications
| Specification | Details |
|---|---|
| Manufacturer | YLLVAPE |
| Heating system | Halogen with ruby balls |
| Maximum heater power | 100 W |
| Standard temperatures | 180°C, 190°C, 200°C, 210°C, 220°C |
| Boost temperature increase | 10°C |
| Session duration | 5 minutes |
| Heat-up time | Approximately 45–60 seconds |
| Power source | Two replaceable 18650 batteries |
| Charging connection | USB-C |
| Dimensions | Approximately 79 × 35 × 119 mm |
How to use the Angus Enhanced
- First, read the supplied guide and complete its first-use preparation.
- Fit suitable batteries, following the polarity markings.
- Load suitable ground dry herbs into the chamber using the funnel.
- Secure your chosen mouthpiece and adjust the airflow.
- Press the power button five times within two seconds.
- Double-click to enter heating mode and select a temperature.
- Wait until the LEDs stop flashing and the device vibrates.
- Draw slowly and steadily.
- Finally, press the button five times to switch off, or allow the five-minute session to finish automatically.
Cleaning and care
Empty the used herbs and brush loose material from the chamber after each session. For deeper cleaning, clean the removable glass and screens separately, following the supplied instructions.
Keep liquid away from the vaporiser body and allow cleaned parts to dry completely before refitting them. Also, protect the glass accessories during storage and transport.
What’s in the box?
The manufacturer’s standard kit includes:
- Angus Enhanced vaporiser.
- Three glass stems.
- Loading funnel.
- Glass water pipe adaptor.
- Sidecar bubbler.
- Filter screens.
- Silicone O-rings.
- USB-C cable.
- Carry case.
- User manual card.
Battery inclusion depends on the retailer’s bundle, so check the selected package before ordering.
Frequently asked questions
Can I replace the batteries myself?
Yes. The side covers provide access to the two 18650 cells. Fit the correct battery type and follow the polarity markings.
Are glass dosing capsules available?
Yes. YLLVAPE offers glass dosing capsules for the Angus Enhanced as a separate accessory. They provide an option for preparing loads ahead of time.
Can I use e-liquid in the Angus Enhanced?
No. YLLVAPE specifies the device for suitable aromatherapy materials and excludes e-liquids, tobacco and tobacco products.
What warranty does it include?
YLLVAPE states a one-year warranty for electronic components from the purchase date. Improper use, physical damage and user-caused faults fall outside its cover. Keep your invoice for any warranty request.
Choose the Angus Enhanced
Choose the Angus Enhanced for halogen heating, adjustable airflow and a versatile glass kit. Its replaceable batteries and straightforward temperature presets make it a practical option for those who enjoy setting up their own dry herb sessions.





















Reviews
There are no reviews yet.